Part numbers marked "replacement" are not affiliated with the original manufacture. Part numbers and pictures are used for cross reference only.
Description
Application
Atlas Copco3001531108 replacement
Maintenance Recommendation for 3001531108
1. Service interval: Replace at 8000 working hours or 12 months, whichever comes first. Advance inspection required for dusty, high-temperature continuous running condition.
2. Safety requirement: Shut down, release full pressure and lock out power before service. Professional technician is required.
3. All filters, gaskets and O-rings inside the kit should be replaced together. Do not reuse old seals to avoid air leakage and oil carryover.
4. Extra inspection: cooler fouling, minimum pressure valve, drain valve, oil return line and motor vibration. Fill with Atlas Copco approved coolant.
5. After maintenance: Carry out air tightness test and no-load test run, record pressure, temperature, differential pressure and current.
6. Warning signs: Rapid differential pressure rise, excessive oil consumption, high discharge temperature, oil carryover in compressed air, perform maintenance in time.
Core Product Advantages
• Low Pressure Drop and Ultra-Low Energy Consumption:
The specially manufactured original glass fiber features excellent air permeability. It maintains high filtration efficiency while minimizing airflow resistance (pressure drop). Every 0.1 bar reduction in pressure drop recovers approximately 7% of power consumption for the whole unit.
• High Pressure Shock Resistance and Anti-Static Design:
The support frame is made of high-strength corrosion-resistant stainless steel, which resists deformation under heavy damping and instantaneous pressure fluctuations. The built-in patented conductive strips effectively eliminate static electricity generated by friction from high-speed airflow and prevent explosion risks inside the oil-gas separator tank.
• Original Factory-assembled System-level Matching:
As a standard integrated maintenance kit, its gaskets and seals deliver outstanding resistance to high temperatures and swelling caused by compressor synthetic oils (such as Roto Inject Fluid / Roto Xtend Duty). They maintain a 100% seal under harsh operating conditions to avoid bypass leakage.