Part numbers marked "replacement" are not affiliated with the original manufacture. Part numbers and pictures are used for cross reference only.
Description
Sullair250028-036 replacement
250028-036 is a dedicated thermostatic valve repair kit (Kit, E6E Thermostat 175/195F / Kit, Thermostat Actuator) for screw air compressors in the United States, which is mainly used to regulate the oil temperature balance of the air compressor lubrication system.
Working Principle and Product Function
The thermostatic valve core is a key control component in the oil circuit circulation of an air compressor:
Cold start stage (bypass circulation):
When the lubricating oil temperature is lower than 175°F (79.4°C), the thermostatic valve core remains closed (bypass state). The lubricating oil does not pass through the oil cooler and flows directly into the main unit for circulation. This helps the unit quickly warm up to the optimal operating temperature and prevents condensed water in the oil-gas system from emulsifying the lubricating oil.
The valve core starts to open when the oil temperature rises to 175°F and is fully open at 195°F (90.6°C). It directs all hot oil to the oil cooler for heat dissipation, keeping the compressor discharge temperature stable within a safe range and preventing high-temperature shutdown protection.
Replacement Cycle and Fault Symptoms
• Recommended replacement cycle:
Preventive replacement is generally recommended every 8,000 operating hours or during the equipment overhaul cycle.
• Common fault signs:
◦ Spool stuck in the closed position:
Lubricating oil cannot enter the cooler, causing the air compressor to trigger a high-temperature alarm or shut down within a few minutes of operation.
◦ Spool stuck in the normally open position:
The oil temperature remains low for a long time, which may lead to water accumulation inside the oil-gas separator and emulsification and deterioration of the lubricating oil.