Part numbers marked "replacement" are not affiliated with the original manufacture. Part numbers and pictures are used for cross reference only.
Description
Sullair250033-036 replacement
250033-036This is an original equipment manufacturer trap kit with 3/32" orifice specially for screw air compressor systems, used to restore the sealing and automatic draining functions of the auto drain valve.
Core Component Composition
• Spherical Water Level Sensor/Float:
Rises and falls with the condensate water level to control the opening and closing of the valve.
• Metal Plate:
Cooperates with the orifice to perform opening and closing actions and prevent compressed air leakage.
• Special O-Ring:
Used for airtight and watertight sealing at the valve body connection to prevent leaks.
Working Principle and Product Function
• Automatic Drainage:
After the compressed air is cooled by the aftercooler, a large amount of condensate precipitates. When the water level inside the air-water separator rises to a certain height, the float rises under buoyancy, lifting the valve plate away from the 3/32" orifice. The internal system air pressure is used to discharge the condensate out of the unit.
• Pressure Retention and Leakage Prevention:
After drainage is completed, the water level drops, the float falls back and pushes the valve plate tightly against the sealing surface. This prevents high-pressure compressed air from escaping along with the water, avoiding air loss and increased energy consumption.
• Fault Prevention:
Regular replacement of this repair kit can resolve malfunctions caused by internal limescale, oil sludge jamming or aging seals, such as "no water discharge (accumulated water entering the air supply pipeline)" or "continuous air leakage (the valve core fails to close tightly)".
Applicable Scenarios and Maintenance Recommendations
• Applicable Equipment:
Widely used for the aftercooler and air-water separator drain assembly of Sullair stationary industrial screw air compressors
• Maintenance Interval:
It is recommended to inspect and replace this repair kit synchronously along with the replacement cycle of the air filter, oil filter and oil-gas separator core when the air compressor has operated for 4,000 to 8,000 hours (or during the annual major maintenance).